Welcome to Vape.to ! Log in or Sign up to interact with the Vape.to community.

shotty mods

Discussion in 'Vape Modding and Technical' started by Teroneld, Sep 7, 2015.

  1. alissasr18

    alissasr18 New Member

    Messages:
    5
    Likes Received:
    0
    ok im just going to put in a little about batteries etc
    links to the batts that i use from dealextreme
    http://www.dealextreme.com/details.dx/sku.4419
    and the charger which does 3.0v or 3.7v via a switch on the side of the unit
    http://www.dealextreme.com/details.dx/sku.1236
    it is also circuit protected which means that once the battery is fully charged this unit will actually stop charging the battery and just maintain that volt level , nice and safe
    heres a line up of batts together so you can see the relative size of them
    [​IMG]

    Uploaded with ImageShack.us

    [​IMG]

    Uploaded with ImageShack.us

    the shotty mod is made to take 2 x 3.0v /3.6v cr123 batts nice n snugg
    if you are using the 17335 batts you will need to place magnet spacers to make up the difference in battery length
    so fit these in as shown

    [​IMG]

    Uploaded with ImageShack.us

    [​IMG]

    Uploaded with ImageShack.us

    negative of the battery in first

    the arms of the mod are adjustable and can be removed for cleaning
    just loosen and undo the little bolts and pull em out then lift the connector bridges off while pushing down the central wire
    juice can accumulate in the contact area if you drip vape like i do
    so if the vape feels as tho it is getting weak despite fresh batteries you may well just need to remove the atty's and give the wire end a bit of a cleanup
    if you drip pour like i do and end up getting juice all over everything then you can pull everything off and give it a good cleanout

    [​IMG]

    Uploaded with ImageShack.us

    when loosened the arms are free to be adjusted to a wide range or removed completely for cleaning
    the way the connectors are set up nice and open its very hard for it to get clogged up at all
     
  2. FerieBarn

    FerieBarn New Member

    Messages:
    4
    Likes Received:
    0
    hi billy i couldn't send a pm to you (im not.comthorized to do a pm so it says - disabled :( ). Any other way to contact you? Thanks!
     
  3. RWUMarcel

    RWUMarcel New Member

    Messages:
    6
    Likes Received:
    0
    hi billy i couldn't send a pm to you (im not.comthorized to do a pm so it says - disabled :( ). Any other way to contact you? Thanks!
     
  4. aprilmay730

    aprilmay730 New Member

    Messages:
    6
    Likes Received:
    0
    You just need to get to 5 posts to be able to PM I believe, so perhaps go find some threads you can contribute to?
     
  5. Gadoduer

    Gadoduer New Member

    Messages:
    5
    Likes Received:
    0
    You just need to get to 5 posts to be able to PM I believe, so perhaps go find some threads you can contribute to?
     
  6. CatteSop

    CatteSop New Member

    Messages:
    7
    Likes Received:
    0
    thanks for the info, can't really find anything to post into as i'm still learning :)
     
  7. propecia

    propecia New Member

    Messages:
    7
    Likes Received:
    0
    thanks for the info, can't really find anything to post into as i'm still learning :)
     
  8. abakus

    abakus New Member

    Messages:
    2
    Likes Received:
    0
    Received mine today, CHEERS! Havent really had a chance to play yet though, nice looking unit sure to get a few questions on it.
     
  9. FuryHUH

    FuryHUH New Member

    Messages:
    11
    Likes Received:
    0
    Received mine today, CHEERS! Havent really had a chance to play yet though, nice looking unit sure to get a few questions on it.
     
  10. theMayne

    theMayne New Member

    Messages:
    5
    Likes Received:
    0
    good news mate , i hope you enjoy it
    any probs or questions let me know
     
  11. Johannes Cross

    Johannes Cross New Member

    Messages:
    6
    Likes Received:
    0
    good news mate , i hope you enjoy it
    any probs or questions let me know
     
  12. Taken nme :)

    Taken nme :) New Member

    Messages:
    5
    Likes Received:
    0
    Billy, your the best mate. The shotty is freaking insane. I bought some stock cr123 from dse just to test it out. MAN oh MAN, it has some kick.

    you should go commercial :)
     
  13. tenten

    tenten New Member

    Messages:
    3
    Likes Received:
    0
    Picked up the shotty from the post office yesterday, all looks great thanks Billy.

    Havent given it a go yet but ill pick up some batts next week and blow my head off :)

    Thanks again Billy!
     
  14. LabGrrl

    LabGrrl New Member

    Messages:
    7
    Likes Received:
    0
  15. pkfqdqmcqa

    pkfqdqmcqa New Member

    Messages:
    4
    Likes Received:
    0
    heisr , nando and scanlan - thanks for the feedback guys
    i hope it provides a good "keep off the nasty ciggies hit" for you
    always good for a .comgh is to pass it to a freind who smokes but has never vaped and see what the reaction is

    cool vid jato cheers for that, i wish i wasnt so camera shy otherwise i would have done something similar
    im bad enough trying to take a good photo
    i drip/pour with mine and it does need a little wipe down every now and then but everything is pretty easy to get to
    the little insulators are uv and heat resistant polypropolene
     
  16. FuedsFela

    FuedsFela New Member

    Messages:
    4
    Likes Received:
    0
    Picked up some CR123s from woolies this arvo to have my first vape on the shotty (rip off artists they are..$9.95 per battery )

    I had a bit of a choke on it at first, need to inhale for less time :)

    Awesome device Billy, just cant wait until my batts come from Deal Extreme so i can vape away without fear of being without :p
     
  17. jykc7wukd

    jykc7wukd New Member

    Messages:
    5
    Likes Received:
    0
    never enough spare time atm
    was meant to be doing something else today but hid in the shed
    these are just bits n pieces
    not intended for sale
    just me mucking about making my next personal pv items
    there is no modders forum here so ill just use this thread instead

    [​IMG]

    Uploaded with ImageShack.us
    took this photo saturday morning and the last photo in this post was taken at 5 pm so spent a good part of the day just stuffing about making this crap , i had to drink beer all day just to cope with the stress
    [​IMG]

    Uploaded with ImageShack.us
    [​IMG]

    Uploaded with ImageShack.us
    tact switch is housed in its own little block of alloy that is easily removable , i used 16mm thick block and will probably redo it in 10mm
    [​IMG]

    Uploaded with ImageShack.us
    510 connectors are not yet pressed in that can wait until im sure ive done all machining needed
    tube will be long enough to take 3 x 3.0/3.7v cr123 type batts
    [​IMG]

    Uploaded with ImageShack.us
    update to the std shotty using 510 connectors with relief cuts where the tube goes
    [​IMG]

    Uploaded with ImageShack.us
    i was going to round off the square edges but it seems to suit it , might make some square alloy endcaps for it aswell to make it look meaner
    im still toying with the idea of making a knuckleduster/ecig combo mod - how handy would that be !!!
    [​IMG]

    Uploaded with ImageShack.us
    pic of the triple next to a standard well thrashed grotty shotty
     
  18. LypevileLicle

    LypevileLicle New Member

    Messages:
    6
    Likes Received:
    0
    hahah Mr.MIA billy. That is some awsome work you have there. Can't imagine the throat hit on that!

    Btw JATO, i think we should make a modders section. We seem to have a few DIY modders here and Mr.Bellett has some fine stuff out there now too! might open the doors too some new creative mod ideas :D
     
  19. have_a_go_mate

    have_a_go_mate New Member

    Messages:
    9
    Likes Received:
    0
    Hey is mine ready yet lol?
    I was on the original list :)
    Snipper
     
  20. camodn

    camodn New Member

    Messages:
    7
    Likes Received:
    0
    I better correct this joke before anyone gets the idea that Billyboy has kept me waiting.
    The real story is I got trapped into trying to read all the ECF ramblings and did not come back for a while, then when I did I forgot all about it. ;)

    Whoops
     
Loading...

Share This Page