Preview: Pioneer4you IPV V200 Box Mod

IPV V200 Box Mod is constructed of Zinc alloy & anodized aluminium & ABS and powered by waterproof YiHi SX531 chip. IPV V200 Mod is a dual 18650 batteries device with adjustable wattage of 5-200W and 5V/2A fast charging. Pioneer4you IPV V200 Box Mod is equipped with 0.96 inch TFT screen to show vaping data clearly. IPV V200 features intelligent on-device customizable flavor curves of soft, normal, strong, custom SXi-EQ curves, EQ1-EQ3.(Soft - Power starts at a lower rate of about 50% and slowly increases to 100%; Normal- Power remains at 100%; Strong - Power starts at a higher rate of about 150% and slowly decreases to 100%)

Parameter:
Size: 90.6* 48mm
Materaial: Zinc alloy & anodized aluminium & ABS
Battery: dual 18650 batteries(not included)
Power: 5-200W
Resistance range: 0.1-1Ω
Voltage: 6.4-8.4V
Charging: Type-C, 5V/2A
Quiescent current: <100uA
Flavor curve: soft, normal, strong, custom SXi-EQ curves, EQ1-EQ3

Features:
Waterproof YiHi SX531 chip
Dual 18650 batteries, max 200W output
0.96 inch TFT screen
Intelligent on-device customizable flavor curves
5 digit puff counter
Interchangeable magnet side battery doors
5V/2A fast charging
30mm 510 connector
Low battery protection
Battery over-charge protection
Time limit ignition protection
Overheat protection
Low resistance protection
Short circuit protection
Reverse polarity protection

Packages:
1* IPV V200 Mod
1* Type-C Cable
1* User Manual