Voopoo vmate 200w tc box mod

Specifications:

Size: 89mm *47mm*30mm
Output Power: 5W- 200W
Quiescent Current: =20uA
Output Voltage Range: 0-7.5V
Resistance Range: 0.05-3.0O(Power Mode)? 0.05-1.0O (TC Mode)
Battery Compatible: 2 x 18650
Temperature Range: 200f-600f/ 100c-315c
Upgraded Function: Yes
Material: Zinc Alloy


Features:
1.Light in weight, compact size, sleek design
2.Safer Gene.Fun chip - Instant firing, stable and safe vaping.
3.Powerful in performance
4.Eight security protections


Packing List of Voopoo Vmate 200W TC Box Mod:
1* Vmate Mod
1* User Manual
1* Gene Chip Card
1* USB Cable
1* Warranty Card


You can buy this device in many different beautiful color combinations, this is always a plus. Build quality looks good and mod looks very stylish. It is made out of zinc aloy with a little bit of plastic.
This is dual 18650 battery mod and you can use it between 5-200w.
Vmate mod is actually very light dual battery mod and it is very comfortable to use.

From the top of the device you can see very nice centered stainless steel connection with gold plated spring loaded 510 pin. I must say connection is very solid and threads are good. You can use 25mm atomizers here without overhang.
Also on the top you can see buttons, which is very interesting. Buttons are clicky and for me it is more comfortable to use this device with thumb, but of course you can use it with your index finger also.

Next we can see battery doors, doors are made out of plastic and doors looks gorgeous. On the battery door you can see the notch, which helps to remove the door, when batteries are inside, doors stays very nice in place and there is no any rattling when you shake the mod. Under the battery door you can see engraved battery orientation very clear and also there is strap, which helps to take off the battery.

On the back you can see voopoo logo and on the front of the mod you can see beautiful very simple screen and usb charging port.
This is very simple device and you can very easy adjust your settings.

To turn on or off the device you need to click 5 times on the fire button.

In wattage mode on the screen you can see:
- Wattage
- Dual battery indicator, I like dual battery indicator
- Coil resistance
- Volts
- Vaping time

To change work mode you need to click 3 times on the fire button every time when you want to change and you can choose between:
- Wattage
- SS
- Ni
- Ti

If you want to lock the device you can hold together the fire button and up button, hold it again to unlock the device.
To enter the menu system you need to hold up and down buttons and if you are in power mode in the menu you can see:
- wattage
- memory
- lock
- sn
- information about firmware

If you are in temp mode, in the menu you will see:
- wattage
- memory
- set
- tcr
- lock

If you are using this device in temp control mode, to adjust wattage you need to click 4 times on the fire button and then you can adjust the wattage.

Protections:

- Battery reverse protection
- Switch timeout protection
- Over-temperature protection
- Output over-current protection
- Overcharge protection
- Over discharge protection
- Short-circuit protection
- Supports balance charge with different band battery

This device has very good chip inside, which is very stable and basically there is no ramp up time, it fires almost instantly. Vmate supports balance charge and you can charge your batteries here, but I would suggest to always use external battery charger. It is worth to mention that this mod also discharge batteries as it should.
Every time when you screw new atomizer on the mod it will ask you is it new coil or old coil.
In my opinion vmate looks very nice and this mod is probably the best one from voopoo.

You can get it here: Voopoo Vmate