Totally new to modding - willing to learn!

Ok, so I'm pretty new to vaping, and I know nothing about modding. I'm a quick learning and good with stuff like this but I need somewhere to start. Where can I go to find out more about modding? are there any tuts or videos, etc?

Also, I have a Joye 510 T and would like to increase the battery, is this possible, if so what can I do with it? Suggestion would be great

 

I don't know that I would bother messing with a ego, go to madvapes website and you will find a lot of mod parts. This is a great place to start if just getting into building mods.

Lets see if we can get you some help. What kind of mod do you want to build, do you want vv or set voltage.
If you want set voltage are you looking for a 3.7 volt or set at something a little warmer.
I do not recommend a vv for your first build, but I will not Try to stop you. My first was a vv.
Do you want a box, tube, wood, custom item?
This will give you a little to think about so we will be able to help you a little better.
I did a walk thru for a vv tank mod its in this section down a few post.

 

For a simple 3.7 build, the Puck mod is easy.

http://puckecig.com/2011/06/how-to-build-the-puck-e-cig-battery-mod-part-1/

Sent from my SPH-M820-BST using Tapatalk

 

May want to go here and learn a little about electronics as well this way you will know why it works instead of just following a how to.

All About Circuits : Free Electric Circuits Textbooks

 

First, thanks for the reply. I've been to madvapes, I get confused looking at all the parts, or should I say glossy eyed, not sure what to choose or where to start. I though about some of your Q's and I'm thinking a tube model, something like a bolt, wood looks cool though I think a set voltage at 3.7 would be good for a start, I'm not against vv, but I don't know much about it.

I'm going to check out your throughway, thanks.

 

Nice link, thanks.

 

More important then any of this is to go to battery university and read about batteries and how not to set your house on fire!

Basic to Advanced Battery Information from Battery University

Keep in mind never be lazy and cut corners. Do simple things to finish connections like heat shrink tubing. Exposed wires is sloppy, lazy, and unsafe.

NEW! Dubro Assorted Heat Shrink Tubing (12) 441 NIB on eBay!

Buy quality parts, you can even get high quality parts from overseas for extremely cheap, but shipping takes awhile.

Ask questions it is cheaper to ask about an idea/theory then to do it and ruin parts and have to re order because you popped some of your last capacitors.