Welcome to Vape.to ! Log in or Sign up to interact with the Vape.to community.

The REVISED Smoktech Telescopic Mod

Discussion in 'Vape Mod Talk' started by KnottyTangerine, May 13, 2015.

  1. It NOW has VENT HOLES:
     
  2. ufos

    ufos Guest

    Are those vents in both the bottom cap and telescope? Interesting.
     
  3. Thanks god for sense field is all I've got to say........
     
  4. talktome

    talktome Guest

    You dont even have to send it back to do that
     
  5. MoeM

    MoeM Guest

    No countersink? Ant what about the wiggle fact that if it does it's only holding on at 2 points in 1 freakin thread! That's bullshit 101 in a machine shop.
     
  6. RobN

    RobN Guest

    Have you all noticed the button? It appears to be revamped.

    Sent from my kitty paws...www.phiniac.com
     
  7. tompic

    tompic Guest

    Not quite as unsightly as before. Kind of seems less exciting now that it won't blow up. ;)
     
  8. terrelsmyman

    terrelsmyman Guest

    ^ This. Terry has 4 rubber inserts to put in his main section. 15 minutes in a oh-mill ought to quell his fears.
     
  9. CodyQ

    CodyQ Guest

    Okay heads up on this mod..
    A report on a Quebec vapers forum has a battery shorting in the smoktech Telescopic Mod.. I would put in the link but it is in french..

    The member said he was driving down the autoroute (highway) and felt the mod getting hot.. opened the window and threw it out while slowing down.. stopped and walked back to retrieve it..

    What he wrote after examining the mod.



    Translated..

    After taking a good look at the problem, it is the vent hole on top that cut my battery. I then sanded it down and it will never cut ever again! The threading is bad.! The exterior finish is really good quality in my opinion.


    So to be safe check your battery plastic for cuts or tears.. check the vent holes for burrs..check the threads in this mod for sharp edges..
    I do not have one so I do not if the threads contact the battery or not.. but knowing Smok they probably do..
     
  10. fiestababy

    fiestababy Guest

    Must have a bunch of retards working in the factory. Lo quality control. No the guy.. his names Lo. And he sucks.[​IMG]

    Tearing batts via a burr can be damn dangerous.
    My friend has a new end (properly de burred) he cut 4 slots and inserted soft tacky plastic a few hundredths too thick with a nylon backing to allow the batts to slip by. No slipping in the hand.
    I'm just too much of a vv whore to go with a set voltage. I think he's gonna go with a custom Rubicon mod and just shelf this thing.
     
  11. animalluver

    animalluver Guest

Loading...

Share This Page