Welcome to Vape.to ! Log in or Sign up to interact with the Vape.to community.

STR8V8PING "BUGATTI" Custom VV Bottomfeeder

Discussion in 'Vape Mod Talk' started by MaMii, Apr 14, 2015.

  1. MaMii

    MaMii Guest

    So here goes . This is my best mod to date plus its a VV bottomfeeder . She came out beautiful so i had to give her a fitting name , "Bugatti" . It is powered by a OkR -T6 chip (3.25v-6.5v)
    This is the same box i used for my BlackBox mod except i gave this one some major modification . You cant even tell it was the same box anymore . The modifications i did on the box is I cut the top lid in half right around the top of the lid .Then i molded the smaller piece of the lid into the bottom lid . This made for a better base for the drip well and button . I also reinforced it from inside the box by molding a piece of .080 DS Copper clad .The drip well and 510 connector is soldered into the box . The base the button and well sit on is about 1/4" thick now . Next i rounded all the corners and filled the recessed area with filler . The front cover also has a squank hole drilled out .I got everything finish sanded and sprayed with silver metallic paint . I also made a design with carbon fiber dinoc on the front and back .It feels rock solid like its made out of thick aluminum and fit my hand perfect. I added a few cool features to the mod as well . Heres whats in there :

    Murata OKR-t6 chip
    - 510 connector with brass drip well (yes i know brass can turn green but i will maintain it )
    - 5A horn switch
    - PTC fuse
    -2 AW IMR 14500 batts in series
    -6ml bottle
    -15ga needle and food grade silicone feed tube
    - Atomizer/bottle LED (High power Plcc6 white )
    - Low battery status LEDs/Flashlight (Works off a internal tact switch) LEDs wont light when its below 6v(2 PLCC2 white LEDs )
    -Rear Vent
    -Thumbswitch with voltage levels marked on case .
    -Magnetic cover (Holds nice and tight)

    Heres the pic . I put my BlackBox mod in the pics too to show how different the box looks after modding it .

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    This one was the most custom mod iv built to date . I no longer have it though as iv recently traded with a member on ECF for a carbon fiber provari with extended cap .Let me know what you guys think . Im slowly moving all my mod threads to this forum and got lots more mods to come . :)
     
  2. idiot.audio

    idiot.audio Guest

    STR8V8PING "BUGATTI" Custom VV Bottomfeeder

    damn..another great mod.
     
  3. Nicci

    Nicci Guest

    STR8V8PING "BUGATTI" Custom VV Bottomfeeder

    fuck this 'like' button - we need a 'love' button on here! (damn that almost sounds naughty, eh?)
    isn't there a song out there about that?


    this is my favorite of all of the mods i have looked at that you have built.
     
  4. dr.dunn

    dr.dunn Guest

    STR8V8PING "BUGATTI" Custom VV Bottomfeeder

    Plus one to that junque! I have really liked your other mods, but this one is FANTASTIC! God I want one!
     
  5. Prettyboi

    Prettyboi Guest

    STR8V8PING "BUGATTI" Custom VV Bottomfeeder

    I see a 18650 version of this mod in my hands soon, I am getting the modding bug myself.
     
  6. Rea

    Rea Guest

    STR8V8PING "BUGATTI" Custom VV Bottomfeeder

    Thanks guys . I originally tried to do this mod with 18650's but they were just a hair too big . The cover wouldnt go all the way down .
     
  7. youngochoa

    youngochoa Guest

    STR8V8PING "BUGATTI" Custom VV Bottomfeeder

    Very nice. :) super industrial looking. Gotta say... Props for having so many different looks to you mods. Compared to the temptress you would think different people made them. Beauty comes in many different forms. :) you have captured many verities very well.

    Also, going that extra mile to customize the boxes make a huge difference.
     
Loading...

Share This Page