New arrival! Ohm Vape Bape Pod Mod Kit

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Mod Kit at present? Today let me introduce you one mod kit named Ohm Vape Bape Pod Mod Kit. Now let’s take a closer look at the mod kit below.

The Original Ohm Vape Bape Pod Vape Mod Kit is powered by 1 x 18350 / 18650 battery (not included). The pod tank is with bottom refilling and bottom airflow control. The coil is replaceable.



Main Features:
Diameter: 22mm
Bottom filling
Bottom airflow adjustable
Powered by 1 x 18650 / 18350 battery (not included)
Battery status and indicator lights
Green: 60%~100% charge (3.85V~4.20V)
Blue: 21~60% charge (3.55~3.85V)
Red: 1%~20% charge (3.30~3.55V)
Protection features:
Dry burn protection: When pressing the fire button, if the e-juice is low or if the coil becomes too dry during your draw, the device will drop the wattage output.
Reverse polarity: The Bape pod will not turn on and will not display any lights.
Short circuit: If it is detected or if the resistance is too high, the light indicator will flash a white light twice in succession. Time out: After firing for 10 seconds, the device will automatically stop and display a cyan light flashes 3 times.

If you want to get one, you can come here:
Ohm Vape Bape Pod Mod Kit >>>