New Arrival-1100mAh IJOY Mercury Pod Style Kit

Hey guys. Today we'll be covering a new AIO kit from IJOY. It is named MERCURY and is the perfect combination of modern innovations and advancements in vape hardware. Well, here we go!

The IJOY Mercury Starter Kit is portable and similar to a pod system kit, so it is ideal for when you are out and about. Powered by a built-in 1100mAh battery, charging is convenient via a USB port on the control face. The output from the battery is a constant 12W and will result in longer than ever vape times. Above the USB port, there are four intelligent LED lights. Three of them indicate the battery's charge level, while the other shows the different working conditions of the device. When the battery level is above 70%, the device will have 3 lights on, 2 lights means the level is above 35% while 1 light means it's time for a recharge.

To add juice to the internal 2mL reservoir, all you do is to unscrew the resin top cap, pour out the cartridge and add e-liquid thru its stopper. It is important to always properly prime the coil after a refill so that it becomes fully saturated and to avoid damage. You may adjust the airflow on the inserted cartridge. It is quite easy to do and it permits a personalized vape experience. This kit has two different coil options. The 1.2ohm regular coil fires from 8 to 12W, while the pre-installed 1.0ohm mesh coil has an output range of 6 to 10W. Both of them are ideal for use with different concentrations of nicotine salt e-liquids. At last, this kit is safe to use as it has multiple protections such as short circuit, low power alert and reverse polarity.

[Parameters]
Material: Zinc alloy & Stainless Steel & Resin
Size: 40 x 20 x 78.46mm
Battery Capacity: 1100 mAh
Output Voltage: 3.15V
Power: 12W
E-juice Capacity: 2ml
Resistance: 1ohm/1.2ohm

Where to buy: https://vapesourcing.com/ijoy-mercury-starter-kit.html

You may also like this: cheap Innokin Z-BIIP