How to customize the flavor of Yocan Pillar E Rigs Dab?

Currently, the e-rigs dab has a very large audience. Many beginners are afraid to use them because of various problems. One of the most common problems is not knowing how to find the best flavor experience.
Players using Yocan Pillar e-rigs dab can switch between 3.2V and 4.2V to find the right flavor. In the power-on state, press and hold the power button 3 times quickly, and adjust the different voltage levels in turn from top to bottom.
Because most concentrates evaporate at voltages between 3.5V and 4.0V. The lower the output voltage, the less steam will be produced, and the higher the voltage, the more steam will be produced. However, if the voltage is too low, the atomizer cannot heat up, and the heat generated is not enough to achieve the atomization effect, resulting in poor taste.
Therefore, Yocan Pillar e-rigs dab is equipped with intelligent three-speed voltage control, which is very convenient for novices to use, and even if the operation is wrong, it will not produce peculiar smell.

The design structure of the atomizer: the air inlet, adjusting the size of the airflow channel can determine the amount of smoke coming out of the atomizer, and can also determine the temperature of the smoke inlet. Under the condition of not changing performance and other conditions, the smaller the air intake hole, the smaller the intake air volume, the worse the effect of steam cutting off the air for cooling, and the higher the temperature of the steam entering the mouth.
Therefore, if the steam is overheated, you can adjust the air suction volume of the bottom air hole, set it to the maximum and try again.
That's why the Yocan Pillar e rigs dab has a customizable, adjustable airflow valve on the side.
Last but not least, we can use the Yocan Pillar electronic portable dab rig by trying it over and over again to find the best taste for your preference.
Related Articles
How to Clean Yocan Pillar Wax E Rig TGT Coils?
Can you charge the Yocan Pillar wax e-rig with any charger?
What is the best voltage to use a concentrate e rig?