how do i get 5.2v out of 3.7? math doesnt line up!

so i've heard 5.2 is the ultimate "sweet spot" when it comes to vaping, and i'd love to be able to make a mod hit this voltage... how can it be done? resistors with a 6v system? some way to bump up a 3.7 system to 5v? let me know, highly interested in the details and design ideas!

 

Maybe smaller battery's to equal 5.2 volts with a spacer, and/or sleeve

 

King,

You can boost a 3.7v battery to 5v. using this circuit board from Texas Instruments...

part # PTN04050CAZ.

However, you'll need a decent battery, I recommend the AW brand, they cost more, but they work much better.

The Trust fire, and the other blue 14500 3.7 protected bats also work, but they tend to drop v quickly an need changing too often and that can be a pain.

the gizmo:



A 5v. AA cartomizer box mod running on a single 14500AW 3.7v rechargeable Lithium battery is pictured below...



Regards
fo

Will work for juice...

 

With the Chuck you can Vape using 3.7, uses an 18650 battery or 6 Volt,using CR123's will work as-is, or
CR2's will require a battery sleeve.
Just to show the change of Volts with using different battery's along with a sleeve, and you could use spacers.
THAG BUILT: A Wolf in Sheeps Clothing!

 

I do not no what PV you want to use this for but I was looking at batterry's and found a 1.2 Volt to add to a3.7 Volt giving you 4.9 Volts. may need a sleeve for one or two of the batteries, as long as their not to long, a spacer if to short.

DealExtreme: $5.43 Maxuss 1.2V 3000mAh Ni-MH AA Rechargeable Batteries (2-Pack)

 

Sorry thought you were tying to modify a PV, making one I see, well you still can use two battery's a Little heavier

 

Does anyone know how to wire a 3.7 to 5 volt booster ?
i am using a ptn04050cas from TI.

 

Are you trying to injure him? You CAN NOT mix Li-ion and NiMH.

 

Do not try to put batteries of different voltage together, this will cause a hardship for the lower voltage battery.

The best way to get 5 volt is with an inline voltage regulator.

 

for 5.2v get a ptn04050 sample from texas instruments download the spec sheet. If you go to the last section on the spec sheet, it should tell you what you need to know.

 

Just curious..has anyone tried using the ti04050 booster set @ 6 or 6.2v?..

 

LOL Mad Vapes mad Vapes HOOOGGG lol now this might motivate me to step up.
Of coursse, I need the "how to" section of Mad Vapes to feel confident.
I am not technical or electrically endow. I can follow instructions w/pics from sources that I trust though.

I do admire you mod guys who lead the way and tempt us no-brainers for this stuff people.

 

A few details on how to wire it would have been more informative than your pics.

 

I liked the pictures very much.
Thanks for posting them.

 

+1. I wanna make babies with Fono's camera!

 

You need to get out more.