To all Sigelei Mod Owners ( What is the best # MOD SIGELEI makes)or made?

VapeRev is a reseller of dingos & rollers, often has stock when Atmizoo is out.

 

I have a #3 I like it.
Worth the $25.
beats the smok tele hands down.

 

Sigelei #8 Side firing button - Works out the box - no mods needed.
Sigelei #19 or #19 b (nZonic clonish) - Works great, but take out top magnet & insert M3 cheesehead brass screw. Use an o-ring on the switch to shorten the throw.
Sigelei #20 - Looks OK (but honestly not the same as a Roller up close and in the hand) - My switch has behaved itself - my spring was OK too.
Smok Natural - Nice mod - Need to find a weaker spring for the side button - I used some 27 AWG Kanthal and made a spring - super soft. I filed the top of the 510 connector so I could flush mount Gennies.

Oh Not sure if available in the US - but maybe also consider the "Beautiful Draw Tube" (Beautiful is the make - not an adjective - chinese for you!!!)

With the money i spent on cheapy mech mods - My advise would be save up & get a second hand mech mod from the classies - Paps or GG or GUS or Ding/Roller etc etc.

Not sure why everyone here talks about difficulty with Kicks in any of these mods - I have 3 kicks and they work in all/most of them. No ALL of them.

Good luck buddy
T

 

I also have the #20 and have had no problems with it. It is one of my favorites and I have been thinking about getting another one. JMO

 

I own a #8 . Straightforward design, worked right out of the box, sleek. It is very solid and reliable

 

I continue to see reports of hard shorts in the Sigelei #20 . I have seen pics of the plastic or delrin where it has been melted into the metal.
If you chose to use a #20 please use a fuse like a Shortstop or Vapesafe or a Kick or Kick clone. I don't want to see anyone getting hurt.

 

Well put Doggin

Sent from my SGH-T999 using Tapatalk 2

 

Maybe that could be the reason my Sigelie 20 button stays on in the off and on position.
Wonder how I can get this fixed.

 

The attempts to modify the switch that I have seen and read about and were not successful enough for me to consider them worthwhile.

 

Well, so far the inexpensive mech mods I'm having good success and are dependable are these,

MKB-TS (solid as a rock)
Sigelei #8 "
CCTS
Kamry 100
Sigelei #19 & 19b (not as dependable as the others because of some misfires)

 

There is a new mechanical mod out of China that IMO has truly raised the bar on Chinese clones.

The EHPRO is a clone of the EA and this time I think the clone is actually an improvement over the original design.

 

I followed this tip where you take a kamry100 bottom switch and exchange it with the Sigelei 19 bottom switch.
The comparison is like night and day. The Sigelei 19 fires everytime and the switch from the kamry100 is much softer to push.

I then added the 19 switch on to my kamry100. I could only get it to a 1/4 turn in fear of destroying the threads and not able to add the original switch back on. Still, the 19 switch with only a thread or so to hold it in place works great! No misfires everytime.