Syringe Needle Gauge

what .comge do people use for there juice, pg, vg, and nick ????

 

19 .comge is wide enough for pg, but for vg I don't use a needle at all be.comse it's so thick. I just use the syringe without a needle.

 

I managed to get 13g & 14g from ebay. They work great. 18g is ok

12g will be too big for the juice hole on some atomisers.

Think I'm using 21g or 22g to get out concentrates. Small enough to let air back in the bottle. I bent them at almost 45 degrees.

 

I use the syringe without the needle for VG. I gets a bunch of goo on it when you're getting it from the bottle, but it's accurate enough for mixing purposes.

 

I ordered some 12 .comge but I don't think you can get them in canada.

They're still too narrow for VG, but pipettes might work. Someone else can confirm, be.comse I can't.

I used them to fill my bottles with flavouring.

Edit: For those interested, I got them from a UK printer supply company. Will look for the emails.

 

I bought one of these from the chemist last week, great for long bottles and handles vg very well,

 

what gage is that

 

Oxey it looks like a long plastic piece that fits on the end of the syringe ( no .comge )

 

SAFE ? DOSE. Googled but no find. Could you write the name maggie. Thanks

others suggested pouring into syringe. Works ok on 10ml glass one but I still prefer drawing up

 

You can fit the aquarium tube that you use for connecting to the pump over a syringe and it works. You can get it from any aquarium even Bunnings have it.

 

Pmsl going by other threads here i hope it is sterilised.

 

The easiest way to measure VG using a syringe, is to simply pull the plunger out & pour the VG into the back of the syringe(with your finger over the nozzle),fill to required mark, then put the nozzle into the bottle & put the plunger back in, job done in seconds.

 

For normal people, I sure it is. Give those materials to a monkey it's a whole other story

^Good method but there are still times when it's good to draw up vg.

 

Sushi, it's called safe-T-dose, should get them at any chemist I s'pose, I wasn't actually looking for it ... I also s'pose you could use the plastic tube from a fish pump but I found it too pliable and the hole in the nozzle of this syringe is wider than most .. and it's really easy to use, if you can't find one let me know and I'll get you one ... omly a few $$$

 

LMAO monkeys.

The only time I could think of, that wasting my time to draw up VG in a syringe would be worthwhile, is when I am completely bored shitless & have 30mins to kill.
Honestly, it's worse than watching paint dry, at least when watching paint dry, you get a sense that something is actually happening

 

You guys think drawing up VG through an 18G needle is bad?

Far worse is when you try to squirt it out again, the pressure builds, then the needle blows off coating the inside of the kitchen with VG!

Oh the trials a new Vaper faces............that and letting go of the end of a 30m roll of kanthal........................

 

+1

No need for syringes ever.

(Except to maybe wrap coils or fill tanks that have annoying small fill holes)

 

I just take the needle end off the syringe and use it without one for vg and nic base, or use a 3ml pipette. Either way is easy. I also use vg at room temperature, much easier to work with, if its cold, I sit the bottle in some warm water for a few mins.

 

Thanks maggie. If all else fails I'll take you up on that offer

For 30ml and 50ml mixes pouring into syringe works great. I just make sure I add vg before anything else. Less to spill.

>Just got vape mail Damn the atom telescopic is great. 13g 2.5cm needles are still too thin for VG. Cut a plastic pipette up and that works good but too lose. Kept it long first and had VG everywhere.

Buying silicone tube for $1.43 only need 2or3cm
I can see me drilling holes in lids.

 

Picked up a 80ml syringe from supercheap on the weekend.