Givinup- New to the vape community

Google the flavour wheel used in beer making and you will see which flavours compliment and which are opposite that nullify the flavour

 

I changed out my 1.5 coil (put some bad tasting juice in it) and put a 0.5 in and put my RY4 in it and dammmn, taste awesome. Flavour, warm vape. Straight lung hits.


Sent from my Multifunctional phone device.

 

No analogues for 7 days couple bad vape choices in this short time:-

- bad flavour juice choices
- Nic levels

All in all all good so far, all trial and error.

Loving my Kangertech mini set up, just built my own 0.5ohm single coil and runs nice although runs "Very Warm" at 25 watts. I knocked it down to 16watts and still warm - hot vape.

Can someone let me know if it's the .comge type in the RBA or is it the Nic making the vape very warm compared to the stock 0.5? Same juice. Just changed the stock coil to the RBA coil that came with the kit.

Cheers


Sent from my Multifunctional phone device.

 

I would try a higher ohm build 0.8 -1.2

 

Hi Shaneo, I battled through for a bit with hot vaping and noticed the vape got back To a reasonable temp. I'd say I had to "run in" the coil


Sent from my Multifunctional phone device.

 

Hi all, couldn't
Think of anywhere else to post this. I want to know the solution to a mix. My answer needs to be a 60ml total (65/35 PG @12mg) using a 30ml doubler.

Ingredients
1) Either of the following doublers in 50/50PG, 80PG or 80VG ratios.
2) 36mg VG
3) VG base
4) Pg base

Thanks in advance, lost my mind trying this one.





Sent from my Multifunctional phone device.

 

65PG35VG or 35PG65VG?

 

65PG/35VG


Sent from my Multifunctional phone device.

 

None of those doubler ratios will allow you to get 65PG35VG with that nicotine base. You will need to have 100PG doublers.

30ml doubler 100PG
20ml VG36 nic
1ml VG0
9ml PG0

 

Maybe that's why I was stumped. What if I went a higher PG, say 80/20


Sent from my Multifunctional phone device.

 

Nope. See edited answer above.